Product Name Description

DTA-2107 | Multi-standard L-band Modulator
  • Satellite test modulator with integrated upconverter
  • Fully agile over the L-band

DTA-2111 | Multi-standard VHF/UHF Modulator
  • Multi-standard modulator for PCI Express
  • Support for most QAM-, OFDM- and VSB-based modulation standards
  • Digital upconversion for excellent signal quality without need for calibration

DTA-2115 | The Ultimate Test Modulator
  • High-end test modulator for PCI Express with support for every popular digital TV and digital audio modulation standard
  • Ultra low phase noise
  • Wideband upconverter 32‚Ķ2186MHz, fully agile over VHF, UHF and L-band

DTA-2131 | Multi-standard VHF/UHF Receiver
  • Tuner, I/Q demodulator and sample-rate converter, optimized for use with SDR technology (Software Defined Radio = demodulation in software)
  • SDR enables advanced features such as full demodulation of DVB-T2 to T2-MI, or MER per OFDM carrier, transfer functions, etc.

DTA-2136 | Dual QAM-A/B/C Receiver
(with ASI Monitoring Ports)
  • Dual-channel QAM receiver, compliant with J.83 Annex A (DVB-C), B and C
  • Applications have access to the complete TS

    DTA-2137 | Dual DVB-S2 Receiver
    (with ASI Monitoring Ports)
    • DVB-S / DVB-S2 receiver that can be configured as single-channel receiver
    • Support for QPSK, 8-PSK, 16-APSK and 32-APSK, or as dual-channel receiver with support for QPSK and 8-PSK

    DTA-2138 | DVB-C2 / DVB-T2 Receiver
    • Single-channel DVB-C2 / DVB-T2 receiver for VHF/UHF with legacy support for DVB-C and DVB-T
    • Hardware-based demodulation with 0% CPU load

    DTA-2139 | Twelve-channel QAM-A/B/C Receiver
    • Twelve-channel QAM receiver
    • Compliant with J.83 Annex A (DVB-C), B and C
    • Applications have access to the complete TS

    DTA-2142 | Multi-mode Serial and Parallel Port
    • Universal parallel port for receiving or transmitting 8-bit data with valid and sync at clock rates up to 108MHz
    • Software-selectable M-LVDS or LVTTL
    • External clock input that can be used as master clock for serial and/or parallel por

    DTA-2144 | Quad ASI/SDI Adapter
    • Four BNC ports with individual status LEDs
    • Operation in ASI or SDI mode can be selected under software control
    • Each port can be independently configured as input or output

    DTA-2145 | Dual ASI/SDI Adapter
    • Two independent ASI/SDI ports: Input + Output or Dual Output (software-selectable)
    • Watchdog-controlled input-to-output bypass relais for redundant configurations

    DTA-2152 | Dual-Port HD-SDI Adapter with Genlock
    • Dual-port HD-SDI adapter for PCI Express with analogue genlock input
    • Each port is software-programmable as input or output

    DTA-2160 | GigE + 3x ASI Ports
    • Transmission and reception of Transport Streams over IP networks
    • Three general purpose DVB-ASI ports
    • Zero-jitter play-out of multiple IP streams
    • Time stamping of incoming IP packets to enable IP jitter analysis

    DTA-2162 | Advanced network card with Dual GigE Ports
    • Hardware-assisted zero-jitter play-out of many IP streams
    • Double buffering of a single logical TS on two network ports, for highly-available systems