- 03-6409-6206
25G SmartNIC Optimized for SMPTE 2110
Perfect for writing SMPTE-2110 applications in software, handling up to two UHD or ten (5 Rx + 5 Tx) full HD streams, fully uncompressed.
| Parameter | Value |
|---|---|
|
Port |
1x 25G/10G SFP+ |
|
IP protocol version |
IPv4, IPv6 |
|
SMPTE2022 TS-over-IP |
ST 2022-1/2 |
|
SMPTE2022 SDI-over-IP |
ST 2022-5/6 |
|
SMTPE2110 Timing |
ST 2110-10 |
|
SMTPE2110 Video |
ST 2110-20/21 |
|
SMTPE2110 Audio |
ST 2110-30/31 |
|
PTP |
ST 2059-1/2 |
|
SFP+ Slot |
SFF-8431 *Direct attach cables are not supported |
|
PCI-Express |
Low-profile PCIe Gen3 x8 |
|
対応OS |
Windows 10, 11, Windows Server 2019,2022
Linux 4.x, 5.x |
Outlined below is the block diagram of the DTA-2125’s firmware, organized into two pathways: transmission (upper section) and reception (lower section).
The transmission path incorporate three hardware pipes that directly interface with the user application, resulting in excellent performance. Packets from these hardware pipes are multiplexed with those from the software pipes and the standard network stack. A scheduler ensures that each packet is transmitted precisely according to its PTP timestamp.
Conversely, the receive path also integrates 5 hardware pipes directly interfaced with the user application. All remaining packets are dispatched to a software router. This router channels real-time AV streams to the software pipes, while normal standard network traffic is forwarded to the conventional network stack.
| Type | Description |
|---|---|
|
DTA-2125 |
25G SmartNIC for PCIe with SMPTE 2110 and SMPTE 2022-5/6 hardware acceleration |
|
DTA-2125-SLP |
DTA-2125 with StreamXpert Lite and StreamXpress player software. |
|
DTA-2125-SXP |
DTA-2125 with StreamXpert analyzer and StreamXpress player software |
| Software | Description |
|---|---|
|
Real-Time Stream Analyzer Lite version
*Lower-priced version with decoding and basic recording functions only |
|
|
Real-Time Stream Analyzer |
|
|
Stream Player for R&D, Testing, Demos |
