VI_FlexRecorder

Visit our booth at IBC 2017!

Amsterdam, RAI, September 14-19, 2017

Drop by and check out our latest products!

The FlexRecorder is a 24/7 recording system, that can capture to files any type of input such as RF, ASI, IP or SDI. With the correct interface, it is also possible to input SD/HD/3G/12G-SDI signals and encode them in JPEG2000 (J2K) to MXF files up to 4K resolution. The web GUI allows control of multiple recording sessions, retrieval of archived data and playout.
Intuitive webGUI control
Scalable from 1 to hundreds of TB Storage
Record multiple inputs
SDI, IP, ASI or RF Input (UHF/VHF, L-band…)
Advanced Search and Playout functions

FlexViewer is a high-quality multiviewer, supporting MPEG-2, H.264 and HEVC codecs. Running on industry standard hardware, cascading servers enables a high number of video cells. This enables a truly scalable multiviewer display for various monitoring applications. The video wall is configured through the easy to use web GUI.
Cascading
(Split the decoding processes over multiple servers)
Key parameters monitored
(Video Black / Freeze etc.)
Multi-format inputs
(Mix of ASI, IP and SDI inputs)

VICO-4 enables 4K 60p (4:2:2 10bit) transport over a single 3G-SDI link and therefore reduce SDI infrastructure costs for transport, cabling, routing and compression storage. This is achieved using visually loss-less TICO compression by a factor of 4:1 and with a fixed delay of a few video lines.
Low delay
less than 40 video lines(<0.5ms)
Compression
4:1
4K video
4K signal as 12G-SDI or 4x3G-SDI (Level A & B)

Visit the Village Island booth at:
2.C55

Book an appointment!

You can follow any responses to this entry through the RSS 2.0 Both comments and pings are currently closed.