Village Island Multi-Standard Compliance Recorder Solution


The Multi-Standard Recording solution is based on FlexRecorder, a one-stop server that provides full day compliance recording from VHF/UHF RF inputs such as DVB-T2, DVB-C/C2, QAM-A/B/C, DVB-S/S2 and Transport Stream inputs over ASI or IP connection. By taking advantage of low price, high capacity storage,the solution is able to record incoming stream 24/7 continuously.

The recording process is based on VillageFlow core engine to provide manual and automatic/scheduled recording. Stream recording can be split into several files with fixed time interval (e.g. 5 minutes per file) or as a loop (30 days, auto overwriting). The recorder is able to calculate the required storage based on the stream bit rate and given recording duration. It can be integrated with an existing NMS and send out alarms through SNMP when storage space is below a given threshold. The server has a scalable internal storage in RAID configuration and also supports external NAS storage extension.


  • Broadcaster and TV Station
  • Content Provider
  • Terrestrial, Cable and Satellite Operators
  • Government Regulatory

Enquire Now!


Compliance Recorder Server

Recorder Server Storage Multiple HDD in RAID 5 or 6 configuration
Internal storage or external NAS
Recording Manual or Schedule recording
Monitoring Error notification with SNMP
Chassis 1 RU, 3RU and 4RU
IP Physical layer IEEE 802.3ab
Data rate 10/100/1000
Connector RJ-45
Maximum TS rate 950Mbit/s
Parallel TSoIP streams 100+*
ASI Physical layer DVB-ASI (coax)
Connector 75-Ω BNC (3x)
Rx or Tx bitrate 0 .. 214Mbit/s
Resolution <1bit/s
Optional RF Receiver Standards DVB-T/T2
QAM Annex. A/B/C
Transport packets per IP 1,2,3,4,5,6 or 7
TSoIP Protocol UDP or RTP
TSoIP FEC and Encapsulation SMPTE 2022
Transcoding rate 0 .. 200Mbit/s
PCI Express v1.1; PCIe x4

Note: RF receiver is able to be installed directly inside the recording server.